Endress+Hauser RIA452 Mode D'emploi page 106

Commissioning
Function
(menu
item)
Signal type 4 - 20 mA
0 - 20 mA
0 - 5 mA (*)
0 - 100 mV (*)
0 - 200 mV (*)
0 - 1 V (*)
0 - 10 V (*)
± 150 mV (*)
± 1 V (*)
± 10 V (*)
± 30 V (*)
Type B (IEC584) (*)
Type J (IEC584) (*)
Type K (IEC584) (*)
Type L (DIN43710) (*)
Type L (GOST) (*)
Type N (IEC584) (*)
Type R (IEC584) (*)
Type S (IEC584) (*)
Type T (IEC584) (*)
Type U (DIN43710) (*)
Type D (ASTME998) (*)
Type C (ASTME998) (*)
PT50 (GOST) (*)
Signal type
PT100 (IEC751) (*)
PT100 (JIS1604) (*)
PT100 (GOST) (*)
PT500 (IEC751) (*)
PT500 (JIS1604) (*)
PT500 (GOST) (*)
PT1000 (IEC751) (*)
PT1000 (JIS1604) (*)
PT1000 (GOST) (*)
Cu50 (GOST) (*)
Cu100 (GOST) (*)
30 - 3000 Ohm (*)
Connection 3 Wire
4 Wire
106
Parameter setting Description
Selects the signal type of the connected sensor.
Parameters marked with an asterisk (*) can only be
selected with the universal input option.
Selects the signal type of the connected sensor.
Parameters marked with an asterisk (*) can only be
selected with the universal input option.
Configures the sensor connection in 3-wire or 4-wire
technology. Can only be selected for "Signal type"
30-3000 Ω, PT50/100/1000, Cu50/100
RIA452
Endress+Hauser