Endress+Hauser RIA452 Mode D'emploi page 103

RIA452
B) Selection from list
Fig. 11: Selecting from list via jog/shuttle dial
5.3.2 Entering text
Fig. 12: Entering text with RIA452
Item No. Description
1 Activate the operating menu by pressing the jog/shuttle dial for at least 3 seconds. The first character then
starts flashing.
2 You can change the flashing (selected) character by turning the jog/shuttle dial (see "Possible characters").
You can go back to the previous character by selecting the back symbol (arrow to left).
3 Press the jog/shuttle dial to select the selected character and to switch to the next character (in our
example, the second character is now flashing).
4 Press the jog/shuttle dial briefly for the last character to accept the entry.
5 Press the jog/shuttle dial for longer than 1 second (max. 2 seconds) to reject the entry at the point in
question.
Endress+Hauser
Æ
Arrow pointing down:
Option is at the top of the picklist. The other entries become
visible when the jog/shuttle is turned in the clockwise direction.
Å
Both arrows visible:
Æ
User is in the middle of the picklist.
Å
Arrow pointing up:
The end of the picklist is reached. The user moves back towards
the start when the jog/shuttle is turned in the counterclockwise
direction.
G09-RIA452ZZ-19-00-00-xx-003
Operation
G09-RIA452ZZ-19-00-00-en-001
103