Disposal; Disposal Of Used Batteries; Troubleshooting - VOLTCRAFT VC-532 AC Mode D'emploi

12. Disposal

Electronic devices are recyclable waste and must not be placed in household waste. At the
end of its service life, dispose of the product according to the relevant statutory regulations.
Remove the inserted batteries and dispose of them separately from the product.

Disposal of used batteries!

You are required by law to return all used batteries (Battery Ordinance). They must not be placed in household
waste!
Batteries that contain hazardous substances are labelled with these symbols to indicate that disposal in
household waste is forbidden. The abbreviations for heavy metals in batteries are: Cd = Cadmium, Hg =
Mercury, Pb = Lead. Used batteries can be returned to local collection points, our stores or battery retailers.
You thus fulfill your statutory obligations and contribute to the protection of the environment.

13. Troubleshooting

The multimeter was designed using the latest technology and is safe to use.
However, problems and malfunctions may still occur.
This section tells you how to troubleshoot common issues:
Always observe the safety information in these instructions.
Error
The multimeter does
not work.
The measured value
does not change.
Any repair work other than that described above must be carried out by an authorized technician.
If you have questions about the multimeter, please contact our technical support team.
56
Possible cause
Are the batteries empty?
Have you selected the wrong measurement
mode (AC/DC)?
Are the measuring leads plugged into the
measuring sockets correctly?
Is the hold function enabled ("HOLD")?
You measured a DC current.
Solution
Check the status.
Replace the batteries.
Check the display (AC/DC) and select
another mode if necessary.
Check that the measuring leads are in the
correct position.
Press the "HOLD" button to disable this
function.
The VC-532 current clamp is only suitable
for AC currents.