Disposal; Product; Batteries And Rechargeable Batteries; Troubleshooting - VOLTCRAFT LCR-400 Mode D'emploi

13. DISPoSaL

a) Product
Electrical and electronic products do not belong in household waste. Dispose of the product according
to the applicable statutory provisions at the end of its service life. Remove any inserted batteries and
dispose of it separately from the product.
b) Batteries and rechargeable batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries and rechargeable batteries.
Disposing of them in household waste is prohibited!
Batteries/rechargeable batteries containing harmful substances are marked with the following symbols,
which point out that they are not allowed to be disposed of in household waste. The descriptions for the
respective heavy metals are: Cd = cadmium, Hg = mercury, Pb = lead.
You may return used batteries/rechargeable batteries free of charge at the official collection points of your com-
munity, in our stores, or wherever batteries/rechargeable batteries are sold!
You thus fulfil the legal requirements and make your contribution to protecting the environment!

14. TRouBLEShooTINg

with this measuring device, you have purchased a product built to the latest state of the art and operation-
ally safe.
Nevertheless, problems or errors may occur.
for this reason, the following is a description of how you can easily remove possible malfunctions yourself.
always observe the safety provisions during use changes!
Error
The measuring device
does not work.
No measured value
change.
Repairs other than those described above should only be carried out by an authorised specialist.
If you have any questions about handling the meter, our technical support is available.
46
Possible cause
Are the batteries dead?
Is a wrong measuring function active?
Were the wrong measuring sockets
used?
Is the Hold function activated (display
"HOLD")?
Remedy
Check the status. Replace the battery.
Check the display and switch the function
if required.
Check the measuring inputs.
Push the button "HOLD" to deactivate
this function.