Lubricating Tyres - Corghi HD 1300 Manuel D'utilisation

In view of the size and weight of tyres for earthmoving machines, and to ensure
safe operating conditions, a second person must be available to keep the wheel in
a vertical position.
A fork-lift truck or a crane should be used when handling wheels weighing more
than 500 kg.
Do not leave the wheel locked on the turntable for periods longer than the normal
operating pauses.
Never leave your work station with the wheel clamped on the turntable and lifted
off the ground.

LUBRICATING TYRES

Before fitting or removing the tyre, lubricate the beads carefully to protect them against
possible damage and to facilitate fitting and removal operations.
For the areas to lubricate, refer to figures 23a (mounting tubeless tyres), 23b (demounting
tubeless tyres) and 23c (mounting tyres with an inner tube and bead).
A
It is prohibited to use hydrocarbon based lubricants (oil, petroleum, etc.) or other
substances that maintain the lubricating effect over time.
N.B. The same safety procedure must be observed when both loading and unloading
the wheel.
Bring especially heavy tyres as close as possible to the base before completing
demounting.
94
DANGER
CAUTION!
B
CAUTION!
CAUTION!
HD 1300 / HD 1300 A Operator Manual
C
23