Assembly/Handling; Hoisting/Handling - Corghi HD 1300 Manuel D'utilisation

ASSEMBLY/HANDLING

Install the machine in compliance with all the applicable safety standards, includ-
ing, but not limited to, those issued by OSHA.
Carry out carefully the assembly and handling operations described.
Failure to observe these instructions can damage the machine and compromise the
operator's safety.

HOISTING/HANDLING

Before handling the machine, compare its barycentre and weight with the capacity
of the lifter you have chosen.
To move the packaged machine, insert the tines of a fork-lift truck into the slots on
the base of the packaging itself (pallet) (Fig. 3).
The packaged machine must not be lifted
using a crane or hoist (Fig. 4).
To handle the machine without packaging,
use only the bracket A, Fig. 5.
HD 1300 / HD 1300 A Operator Manual
CAUTION!
CAUTION!
CAUTION!
CAUTION!
A
EN
4
5
81