Corghi HD 1300 Manuel D'utilisation page 109

Rim with side ring
Rim with an open side for axial tyre mounting.
Ratchet
A specifically shaped part with a fulcrum and a tooth for coupling.
Bead breaker disc
Tool used for tyre bead breaking.
Clamps
Hooked mechanical part for holding or moving.
Pump unit
Assembly consisting of an electric motor and a hydraulic pump.
Tool unit
Group of equipment for tyre bead breaking and demounting.
Control lever
Remote control unit used to make the machine perform all the movements necessary for
the various operations.
Grooving
Operation for restoring the groves in the tyre tread.
Inner/outer bead breaking
Separation of the tyre bead from the rim edge.
Supersingle
Extra wide tyres that replace twin tyres.
Bead
Each enlarged edge of the tyre that is in contact with the wheel rim.
Tubeless
Tyre that does not have an inner tube.
Tool
A specifically shaped part that is used for mounting and demounting.
EN
HD 1300 / HD 1300 A Operator Manual
109