Fixing To The Ground - Corghi HD 1300 Manuel D'utilisation

Install the tyre changer in the chosen work posi-
tion, complying with the minimum clearances
shown in fig. 8.
Ambient conditions in the place of operation
- Relative humidity 30% - 95% without condensation.
- Temperature 0°C - +55°C.
IMPORTANT: for the correct and safe operation of the machine, the lighting level in the
place of use should be at least 300 lux.
RISK OF EXPLOSION OR FIRE. Do not use the machine in areas that could be ex-
posed to inflammable vapours (petrol, paint solvents, etc.).
Do not install the machine in a narrow area or below floor level

FIXING TO THE GROUND

If the machine is to be fixed to the ground, use M10
expansion plugs in the areas indicated in Fig. 9.
HD 1300 / HD 1300 A Operator Manual
1500
WARNING
DANGER
2000
8
EN
9
83