General Settings - Psm; Basic Procedure - JVC EXAD KD-AR8500 Manuel D'instructions

General settings — PSM

Basic procedure

You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
Enter the PSM menu (see page 5).
2
Select a PSM item.
Ex.: When "Scroll" is selected
Indications
Demo/Link
Display
demonstration
WallPaper
Wall paper
LevelMeter
Audio level meter
PICT
Pictures
Selectable settings, [reference page]
Demo: [Initial]; Display demonstration (animation) appears.
ImageLink: To show a still image while playing back an
MP3/WMA track, [13, 15, 52].
Off: Cancels.
• These graphics appear if no operation is done for about 45 seconds.
You can select the background screen of the display window.
Standard 1 [Initial] O Standard 2 O Standard 3
O (back to the beginning)
You can select the level meter.
Meter1 [Initial] O Meter2 O Meter3 O (back to the beginning)
• Press DISP repeatedly to show the selected level meter.
You can activate the graphic screen using either movie or picture, [36].
Select the picture size first.
Large:
[Initial]; 256 x 64 pixel (full screen size)
Small:
64 x 64 pixel (CD jacket image)
After select the picture size, you can select one of the following items
separately for "Large" and "Small."
Picture: [Initial]; One of your edited still images stored in
"Picture" is activated.
Slideshow: All stored still images are activated and shown in
sequence (UserSlide).
Movie: Your edited animation stored in "Movie" is activated.
• Press DISP repeatedly to show the selected graphics.
3
Adjust the setting.
4
2
Repeat steps and
other PSM items if necessary.
5
Finish the procedure.
3
to adjust the
To be continued....
37