JVC EXAD KD-AR8500 Manuel D'instructions page 56

Symptoms
• DSP mode cannot be
selected other modes than
"Defeat."
• Only high range sound
or low range sound
is reproduced though
full range speakers are
connected.
• Download does not seem to
finish.
• The display graphic
function does not work
correctly.
• The display screen dims.
• You cannot activate
"Slideshow" for "PICT"
("No Slide" is shown as the
selectable item).
• "No Magazine" appears on
the display.
• "No Disc" appears on the
display.
• "Reset 08" appears on the
display.
• "Reset 01" – "Reset 07"
appears on the display.
• The CD changer does not
work at all.
56
Causes
Crossover network is
activated.
Crossover network is
activated.
It takes quite a long time to
download an animation of
many frames (see page 53).
Temperature in the car
compartment is very low.
Temperature in the car
compartment is high.
No still images are
downloaded yet.
No magazine is loaded in the
CD changer.
No disc is in the magazine.
Disc is inserted upside down.
This receiver is not connected
to the CD changer correctly.
The CD player may have
functioned incorrectly.
The built-in microcomputer
may function incorrectly due
to noise, etc.
Remedies
Deactivate crossover network
(see page 28).
Deactivate crossover network
(see page 28).
Wait until the operating
temperature resumes.
Turn off the power, and
wait until the operating
temperature resumes.
Download a still image.
Insert the magazine.
Insert disc into the magazine.
Insert disc correctly.
Connect this receiver and the
CD changer correctly and
press the reset button of the
CD changer.
Press the reset button of the
CD changer.
Reset the receiver (see page
2).