Tandberg Data SLR Serie Manuel D'installation Et Guide De L'utilisateur page 64

Tandberg Data
60
Tar command examples:
tar cvf /dev/rmt/c0s0 /etc will perform the backup of the /etc
directory
tar tvf /dev/rmt/c0s0 will read the data on the tape
tar xvf /dev/rmt/c0s0 will restore the data from the tape to the
current directory tree
SCO UnixWare ARCserveIT
• Embedded with SCO UnixWare 7, Computer Associates
ARCserveIT Enterprise Edition offers complete and
comprehensive Backup and Restore for your SCO System.
• The SLR5, SLR24, SLR7, SLR40, SLR50, SLR60, SLR75,
SLR100 and SLR140 are supported. Please refer to the latest
compatibility information from our web site at
www.tandberg.com.
Installation
The installation of ARCserveIT is included in the SCO UnixWare
setup.
If it was not selected during the O/S setup, you must use the
Software Management to install it.
SCO UnixWare Graphic Interface 1)
Double-click on SCO Admin.
2) Select Software Management.
3) Select application Installer.
4) Follow the instructions on the screen.
SCO UnixWare Console
1) Login as Root.
2) Type SCOADMIN.
3) Select Software Management.
4) Select application Installer.
5) Follow the instructions on the screen.
NOTE:
For any questions related to this application or its installation, please refer to
the online documentation provided on the SCO UnixWare CD-ROM.
Tandberg SLR Installation and User's Guide