Tandberg Data SLR Serie Manuel D'installation Et Guide De L'utilisateur page 40

Tandberg Data
36
9) Select "OK" in the "Install Driver" window.
10)
If the option appears, then select "New" in the
"Windows NT Setup" dialog; then enter the
drive/path that was entered in step #6 above.
same
IMPORTANT!
Always select "New" if it appears -- do NOT select "Current"
11) If you wish to install other tape device drivers, select "No"
in the "System Settings Change - Do you want to restart
your computer now?" window and repeat steps 4 to 10. After
all the needed device drivers have been installed, select "Yes"
in this window to shutdown and restart Windows NT. This will
activate the changes made.
Software Installation
1) Insert the Server CD-ROM.
2) Open My Computer.
3) Double-click on the CD-ROM icon.
4) A Browser automatically appears.
5) Select Backup Exec for Windows NT.
6) Click on the install icon.
7) Follow the instructions on the screen.
NOTE:
For any questions related to this application or its installation, please refer to
the online documentation included on the CD-ROM.
Tandberg SLR Installation and User's Guide