Sco Unixware; Host Adapter; Backup Applications - Tandberg Data SLR Serie Manuel D'installation Et Guide De L'utilisateur

Tandberg SLR Installation and User's Guide

SCO UnixWare

Host Adapter

SCO UnixWare includes a driver for most SCSI host adapters.
If the appropriate driver cannot be found, please refer to the
installation guide provided with the SCSI host adapter.
Installation
1) Install the SLR Tape Drive. 2)
Turn On the PC.
3) During the boot process, SCO UnixWare automatically detects
the SLR and install the correct tape driver.
NOTE:
For any questions related to this operating system or its embedded Backup
applet, please refer to the documentation provided on the SCO CD-ROM.

Backup Applications

SCO UnixWare System Command
TAR, CPIO and DD allow simple backup, Verify or Restore
operation to be performed.
2 different device drivers can be used:
· A
Non Rewind
· A
device driver (used only to perform overwrite
Rewind
backup)
For a complete explanation on how to use the system commands,
please refer to the SCO UnixWare documentation, or the online
help. (MAN command).
device driver (used to perform append Backup)
Tandberg Data
59