Tandberg Data SLR Serie Manuel D'installation Et Guide De L'utilisateur page 26

Tandberg Data
22
Unloading a Data Cartridge
Tandberg SLR2 ®
Tandberg SLR24, SLR7, SLR40, SLR50, SLR60,
SLR75, SLR100 and SLR140
Eject
button
Handling a Data Cartridge
To improve data reliability and data cartridge lifetime, please
respect the following:
· Do not drop data cartridges
· Make sure the air around the tape drive and the data cartridge
storage area is clean
· Before using any data cartridge, expose it to the actual
operating environment for at least four hours
· Replace worn or excessively noisy data cartridges
Storing Data Cartridges
The best practice to store a data cartridge is to rewind it to the
beginning of tape before storing it in its protective case.
SLR5
1) Wait for any tape activity to
finish.
2) Press the
Eject
button location).
3) When the front of the tape drive
opens, remove the data cartridge.
4) Manually close the front of the
tape drive.
1) Wait for any tape activity to
finish.
2) Press the
Eject
button location).
3) The data cartridge will be ejected
automatically.
Tandberg SLR Installation and User's Guide
button (see left for
button (see left for