Windows 98 Windows; Edition; Host Adapter; Backup Applications - Tandberg Data SLR Serie Manuel D'installation Et Guide De L'utilisateur

Tandberg SLR Installation and User's Guide
Windows 98
Windows 98

Host Adapter

Windows 98 and Windows 98 Second Edition include a driver
for most SCSI host adapters. Since most SCSI host adapters
support Plug-And-Play functionality, The SCSI interface it will
be automatically detected after its installation and the necessary
driver(s) copied to the hard disk.
If the host adapter is not automatically detected, please refer to
the installation guide or the Read-Me file provided with the
SCSI board.

Backup Applications

Windows 98 Embedded Backup Applet
·
This application provides complete protection for your data,
including automatic backup operation. (Scheduled Operation)
· A Backup Wizard helps you performing all operations you
want to do with the SLR tape drive.
• The embedded backup applet supports Tandberg SLR2, SLR3,
SLR4, SLR4DC and SLR5 tape drives. For SLR24 and
SLR50, tape drives, Veritas Backup Exec for Windows 95/98
is required. (SLR7, SLR40, SLR60, SLR75, SLR100 and SLR140
may work but are not qualified by Tandberg Data)
Installation
To start the Backup application:
1) Click on START.
2) Click on Programs.
3) Click on Accessories.
4) Click on System Tools.
5) Select Backup.
Tandberg Data
2nd

Edition

53