How To Rewind A Data Cartridge - Tandberg Data SLR Serie Manuel D'installation Et Guide De L'utilisateur

Tandberg Data

How to Rewind a Data Cartridge

Tandberg SLR7 ® SLR140
The SLR7-140 drives automatically perform this operation
when the Eject button is pressed.
Tandberg SLR2® SLR5
Unix System Command
Using the system command, a rewind operation has to be
performed using the MT command. (Refer to the MT docu-
mentation for details)
Unix System/PC System Using Backup
Application
To make sure the tape is at Beginning Of Tape, a retension
command has to be executed, prior to ejecting the tape.
When this operation is completed:
Eject the tape from the drive and then store it in its protective
case.
Storage Condition
Avoid high temperature (>25C/77F) and high humidity (>50 %
RH)
Store the data cartridge in a cool and dry environment.
Do not store the data cartridge near devices with strong
magnetic fields, such as computer monitors, TV sets, or
loudspeakers.
Conditioning
Prior to use, the data cartridge should be adapted to the
operating environment for a time at least equal to the period it has
been out of the operating environment (up to a maximum of 8
hours).
Tandberg SLR Installation and User's Guide 23