Windows Nt; Scsi Host Adapter; Tape Driver; Windows Nt 4.0 Tape Driver Installation - Tandberg Data SLR Serie Manuel D'installation Et Guide De L'utilisateur

Tandberg SLR Installation and User's Guide

Windows NT

SCSI Host Adapter

Windows NT includes a driver for most SCSI host adapters. If you
cannot find the appropriate driver, please refer to the
installation guide provided with the SCSI host adapter or
contact your computer supplier.

Tape Driver

Windows NT 4.0 includes a tape driver that supports the SLR2,
SLR3, SLR4, and SLR4DC for all versions of Windows NT
and Service Pack.
SLR5 support is provided by Service Pack 6A. (Available from
www.microsoft.com).
The SLR24, SLR7, SLR40, SLR50, SLR60, SLR75, SLR100
and SLR140 require an additional tape driver that is available
from the Tandberg website at www.tandberg.com.
Windows NT 4.0 Tape Driver
Installation
1) Double-click on the "Tape Devices" icon from the
Control Panel.
NT will detect automatically which Tandberg SLR tape
drive is installed on the system and prompts you to install the
driver.
Tandberg SLR2, SLR3, SLR4, SLR4-DC and SLR5
Installation
2) Select "Tandberg 3660, 3820, 4120, 4220, 4222".
3) Select OK and follow the instruction on the screen.
Tandberg Data
29