Taconova ES 5941 Manuel D'utilisation page 83

ES 5941
ZIR06 CIRC. CALI-
BRATION
ZIR07 FLOW RATE
CIRCULATION
ZIR10 RUNTIME
CIRC.PUL-
SECON.
ZIR11 OFFTIME
CIRC.PUL-
SECON.
ZIR12 CIRC. TIME
PROGRAM
ZIR13 CIRC. MODE
WHEN TAPPED
ZIR14 SWITCH ON
CIRCULATION
Operating instructions
30
n
Circulation 0: Off = no calibration.
flow rate cali-
n
1: Manual = calibrate 1x.
bration
No automatic reset to 0. Set to
0 and then to 1 in order to cali-
brate again.
n
2: Auto = Calibrate each
Monday at 2 am.
Circulation Flow rate when the circulation
flow rate. pump is active, as a manual entry
or as a metrologically determined
value from ZIR06 CIRCULATION CAL-
IBRATION.
Minimum run- If operation of the circulation is
time WWC pulse-controlled, the runtime of
the pump WWC is defined with
this value. This minimum runtime
is also applicable in relation to tap
support.
Off time WWC Once the runtime ZIR11 OFFTIME
CIRC.PULSECON. (05:070) of pump
WWC has elapsed, operation of
the WWC is blocked for this period
of time. This minimum downtime is
also applicable in relation to tap
support.
Time program Time program for enabling the cir-
for domestic culation function
hot water cir-
culation
Circulation Circulation mode is defined during
mode during tapping. This determines whether
tapping the selected circulation mode is
active during tapping or not. Note:
Tap support is always active irre-
spective of this definition.
n
0: on - circulation mode active
during tapping
n
1: off - circulation mode off
during tapping
Switch-on If the circulation return tempera-
hysteresis for ture does not reach the circula-
the circula- tion setpoint temperature minus
tion setpoint the setting, the circulation pump
temperature is switched on.
Info and menu parameters
0...2 - 25
0...999.9 l/min 25
1...24 min 25
1...24 min 25
- - 0
0...1 - 25
1...30 K 0
04/2021 Item no. 215790 EA no. 1321
36:010
23:111
05:070
05:071
05:064
36:032
36:035