Taconova ES 5941 Manuel D'utilisation page 79

ES 5941
SEK SECONDARY
SEK01 DHW TEM-
PERATURE
SEK02 DHW
TEMP.SET-
POINT
SEK03 DHW COLD
WATER TEMP
SEK04 FLOW RATE
DHW
SEK05 CIRCULATION
TEMP
SEK06 SETPOINT
CIRCULATION
T
AUS REPORTING
AUS02 MAX FLOW
RATE 24H
AUS03 ENERGY DHW
AUS04 TOTAL
ENERGY DHW
AUS05 PRIM. PUMP
OPERATING H
Operating instructions
26
Domestic hot Display for the current tap tem-
water tem- perature on the secondary plate
perature TWW heat exchanger.
Domestic hot Display for setpoint BAS01 DHW
water set- TEMP.SETPOINT or LEG01 TEMP
point tem- TERM.DISINFECTION if legionella
perature TWW protection is active, and fixed
10 °C frost protection in standby.
Domestic Display for the current domestic
cold water cold water inlet temperature on
temperature the secondary plate heat
TKW exchanger.
Flow rate Display for the current water flow
FLOW rate on the secondary plate heat
exchanger.
Circulation Display for the current circulation
temperature temperature, local value
TBZ according to the choice of sensor
ZIR03 SENSOR CIRCULATION from
TKW, TBZ or TWW.
Circulation Display for the circulation set-
setpoint tem- point calculated from BAS01 DHW
perature TEMP.SETPOINT minus ZIR01
TEMP.REDUCE TSET CIRC..
Maximum flow
rate in 24h
Partial energy Display for the energy require-
requirement E ment for domestic hot water
preparation in kWh. The counter
returns to 0 once 1 Mwh is
reached. This allows the total
yield to be read in MWh and the
partial yield to be read in kWh.
Total energy
requirement
GES
Operating
hours of the
primary pump
FRIWA
Info and menu parameters
0...120 °C 0
0...120 °C 25
0...120 °C 0
0...999.9 l/min 0
0...120 °C 0
0...120 °C 25
0...999.9 l/min 25
0...999.9 kWh 0
0...999.9 MWh 0
0...999.9 h 0
04/2021 Item no. 215790 EA no. 1321
00:067
01:067
00:068
00:069
00:118
01:118
02:126
23:006
23:013
02:120