ES 5941
4.4.1 Adjusting the standard display
Accepting a value in the standard dis-
play
4.4.2 Resetting energy data
Resetting energy in kWh
4.5
Entering the code
Operating instructions
18
Select the measured temperature or data value to be accepted (see
Ä Chapter 4.4 "Querying the temperatures and operating data"
on page 16 ). Press and hold the
display. The value is shown in the standard display.
The energy can be reset manually. Pressing the
seconds resets the current value to zero. If the
the display in kWh is reset to "0".
To be able to select parameters with key = 25 (see
Ä Chapter 5.1 "Values, information level"
on page 24 and Ä Chapter 5.2 "Adjusters"
on page 27), it is first necessary to enter code "25".
Operation
button until "YES" appears in the
button for a few
button is pressed,
04/2021 Item no. 215790 EA no. 1321