Taconova ES 5941 Manuel D'utilisation page 58

Safety information
Operating instructions
For the operating company
Warranty conditions
Device settings
04/2021 Item no. 215790 EA no. 1321
DANGER!
Never connect or reconnect the device when ener-
gised and never operate it when it is open. Never
operate the device in explosive areas. Never fasten
the device to a flammable surface. Never operate the
device above or below the limit values listed in the
technical data. If it is to be assumed that harmless
operation is no longer possible, take the device out
of operation immediately (e.g. in the event of obvious
damage or malfunctions).
These assembly and operating instructions contain basic instruc-
tions and important information regarding safety, assembly, commis-
sioning, maintenance and use of the device. These instructions are to
be read in full and observed by the installer or specialist and by the
operating company prior to assembly, commissioning and operation
of the device.
The hydraulic schematics depicted in these instruc-
tions are schematic diagrams and are in no way a
replacement for proper plant planning which is why
correct function cannot be guaranteed if such dia-
grams are reproduced directly.
Technical descriptions may be changed without any
prior notification. Any potential printing errors or
changes that occur in the meantime do not consti-
tute a basis for legal claims.
Allow the specialist to give you a detailed briefing on how the device
functions and on how to operate it. Store these instructions in the
vicinity of the device at all times.
In general, it is forbidden to open the device and the accessory parts.
Repairs may only be carried out by the manufacturer. Only original
spare parts and accessories may be used. The manufacturer's war-
ranty is voided in the event of improper installation, commissioning,
maintenance and repair of the device, failure to observe the assembly
and operating instructions and in the event of misuse of the device.
Plant parameters and switching times entered individually remain
saved in the integrated long-term memory even after a RESET or a
prolonged shutdown. Such parameters and switching times ensure
safe operation over many years.
Operating instructions
ES 5941
5