Taconova ES 5941 Manuel D'utilisation page 73

ES 5941
Operating instructions
20
3. Query the set time program with the
The status of the respective time is shown by
means of "ON" and "OFF" . In this context, the
starting time for a change can be selected,
e.g. "00:00".
4. Use to select the desired action (SELECTION OF TIME, POWER
ON TIME or POWER OFF TIME).
Example: Press
appears and use
until the next change of the switching phase.
5. Select the desired action with
Example: Press
appears and use
until the next change of the switching phase.
Repeat steps 4 and 5 alternately if there are
multiple switching phases.
6. Pressing the button exits the input for the switching times.
1 x return to step 2 to select a new day or block
of days.
If the
the time program yes/no appears. yes
SAVE
saves the changes and no cancels the
changes and discards all adjustments, then
return to point 1.
jumps to the menu selection, see point 1.
If the programmed data is to be discarded, it is
necessary to exit the time programming. Otherwise,
the previously programmed data is still present
despite "Save no". The controller returns to the
selected operating mode following a timeout of
approx. 2 minutes.
button.
2 x until POWER OFF TIME
to set the desired time
.
2 x until POWER ON TIME
to set the desired time
button is pressed again, the question
04/2021 Item no. 215790 EA no. 1321
Operation