Taconova ES 5941 Manuel D'utilisation page 78

Info and menu parameters
STA06 ACT. VALUE
OUTPUT 3
STA07 ACT. VALUE
OUTPUT 4
STA08 ACT. VALUE
OUTPUT 5
STN1 STATUS STA-
TION CAS.
STN2 STATUS STA-
TION CAS.
STN3 STATUS STA-
TION CAS.
STN4 STATUS STA-
TION CAS.
STN5 STATUS STA-
TION CAS.
PRI PRIMARY
PRI01 TANK TOP
TEMP
PRI02 TANK TOP
SETPOINT
TEMP
PRI03 TANK BOTTOM
TEMP
PRI04 PRIM. FLOW
TEMP
PRI05 PRIM. RETURN
TEMP
04/2021 Item no. 215790 EA no. 1321
Actual value Output 3
Actual value Output 4
Actual value Output 5
Status during Status of the station in the FW
cascade cascade manager: Digit 1:
operation
Sequential number for the sta-
tion, range 0...5, 0: Station not
Status during
available
cascade
operation
Digits 2...4: Control signal "s" of
the CM for this station:
Status during
cascade
n
0: Off
operation
n
1..100: Overmodulation with s
in %
Status during
n
101: Not ready, no power
cascade
operation
n
102: Standby
n
103: Controlling
Status during
cascade
operation
Temperature Display for the current tempera-
of consumers ture in the buffer/tank at top.
at top TXO
Setpoint Display for the calculated set-
temperature point in the buffer/tank. This
of the con- value is calculated from the DHW
sumers at setpoint and the flow rate-
top dependent temperature loss.
Temperature Display for the current tempera-
of consumers ture in the buffer/tank at bottom.
at bottom
TXU
Flow tem- Display for the current flow tem-
perature PWT perature on the primary plate
TPV heat exchanger, heat source.
Return tem- Display for the current return
perature PWT temperature on the primary plate
TPR heat exchanger.
0...100
0...100
0...100
00...1103
00...2103
00...3103
00...4103
00...5103
0...120
0...120
0...120
0...120
0...120
Operating instructions
ES 5941
% 0 22:033
% 0 22:034
% 0 22:035
- 0 02:123
- 0
- 0
- 0
- 0
°C 0 00:015
°C 25 00:015
°C 0 00:016
°C 0 21:023
°C 0 21:024
25