Taconova ES 5941 Manuel D'utilisation page 82

Info and menu parameters
WHF00 WARM
HOLDING
FUNCTION
BAS09 TIME OF DAY
BAS10 DATE
BAS15 MIN TEMP
HEAT
SOURCE
BAS16 DAYLIGHT
SAVING TIME
PAR SET VALUE
ZIR CIRCULATION
ZIR00 CIRCULATION
MODE
ZIR01 TEMP.REDUCE
TSET CIRC.
ZIR04 TBZ SENSOR
TYPE
ZIR05 TOLERANCE
CALI. CIRC
04/2021 Item no. 215790 EA no. 1321
Option: The standby/warm holding func-
Standby/ tion keeps the heat exchanger at
warm holding a standby temperature in order to
function ensure rapid domestic hot water
preparation.
Time of day The time of day is automatically
adjusted to daylight saving time
and to standard time.
Date
If the temperature in the tank is <
Primary/tank
minimum setting, the station is switched
temperature
off and an "11" status message is
generated.
Daylight Suppression of the automatic
saving time changeover from daylight saving
time to standard time:
n
off: automatic changeover
from daylight saving time to
standard time
n
on: automatic changeover
from daylight saving time to
standard time is suppressed
Adjuster is visible if circulation mode ZIR00 (05:006) is not set to 0.
Circulation pump function (see above for basic
parameters)
Setpoint Setpoint reduction for circulation
reduction for return, results in the circulation
circulation setpoint temperature that is to be
return reached at sensor TBZ. TBZset =
TWWset - TWWset_return
n
TBZ circula- 0: NTC 5K
tion sensor
n
1: PT 1000
selection,
sensor type
Circulation Circulation flow rate tolerance.
flow rate tol- Maximum permissible deviation
erance below the flow rate measured
values in relation to calibration.
on/off
00:00
yyyy
dd:mm
0...90
on/off
0...3
0...90
0...1
0...100
Operating instructions
ES 5941
25 05:113
- 0 02:72
- 0 02:070
°C 25 05:058
- 25 04:003
- 0 05:006
°C 0 05:054
- 25 05:088
% 25 36:011
29