Function and Use
4
Function and Use
4.1
Superstructure
Fig. 1: MFV II-III - superstructure
1
Valve inlet (from pump)
2
Valve outlet (to dosing line)
3
Bypass connection (to tank)
4
Overpressure: venting / draining (setting knob "B")
We recommend the use of a manometer to be able to read the set back
pressure.
4.2
Functional Description
The following functions are done by two spring loaded diaphragms.
4.2.1
Pressure holding function
417101224 Rev. 05-05.2019
5
Pressure maintenance side: Emptying (setting knob
"A")
6
Manometer connection
Protection against sucking empty at under pressure or empty
lifting due to creation of an artificial counter pressure.
In normal operation a diaphragm valve must be pressed
against a preset spring pressure of 0,1 MPa (1 bar) for
passage to the metering line by the delivery pressure of the
metering pump.
20