Description/ Scope Of Delivery - WAGNER WOOD & METAL SPRAYER W 300 Mode D'emploi

GB
•
Do not use the spray guns to spray flammable substances.
•
The spray guns are not to be cleaned with flammable solvents.
•
Caution against dangers that can arise from the sprayed substance and observe the
text and information on the containers or the specifications given by the substance
manufacturer.
•
Do not spray any liquid of unknown hazard potential.
•
The device may not be used in workplaces covered by the explosion-protection
regulations.
•
To avoid the hazard of explosion when spraying, provide for effective natural or
artificial ventilation.
•
There must be no sources of ignition such as, for example, open fires, smoke of lit
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the
vicinity during spraying.
•
Ensure that no solvent vapors are sucked in by the unit. Do not spray onto the unit!
•
The spray gun is not a toy; children must therefore not be allowed to handle it or play
with it.
•
Before working on the spray gun remove the power plug from the socket.
•
Cover areas that are not to be sprayed. When working keep in mind that wind, for
example, may transport paint mist over great distances and cause damage.
•
The units may only be used with a functional valve. If paints rises in the ventilating
hose (Fig. 1, item 16) do not operate the unit further! Dismantle and clean the
ventilating hose, valve and diaphragm and replace the diaphragm if necessary.
•
Do not lay the spray gun.
•
The device is equipped with a thermal release which disconnects the device in case of
overheating. In this case, turn off the device, remove the plug and let the device cool
down for at least 1/2 hour. Eliminate the cause of heating, e.g. bent hose, soiled air filter,
slots for air intake covered.
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fulfilled.

4. Description/ Scope of delivery

1 Air cup
2 Nozzle
3 Union nut
4 Standard spray attachment
5 Trigger guard
6 Material volume regulation
7 Handle
8 Combined ON/OFF and speed switch 18 Stirring rod
9 Air hose
10 Carrying belt
* This is inside the container: remove it before starting operations!
20
Description/ Scope of delivery (Fig. 1)
11 Air filter
12 Air screen
13 Mains lead
14 Spray gun holder
15 Container
16 Ventilating hose
17 Valve
19 Replacement nozzle seal*
20 Lubricating grease (without illustration)*
W 300