Description/ Scope Of Delivery; Coating Materials Suitable For Use - WAGNER STUDIO HOME DECOR SPRAYER Mode D'emploi

GB
•
Do not use the spray guns to spray flammable substances.
•
The spray guns are not to be cleaned with flammable solvents.
•
Caution against dangers that can arise from the sprayed substance and observe the
text and information on the containers or the specifications given by the substance
manufacturer.
•
Do not spray any liquid of unknown hazard potential.
•
The device may not be used in workplaces covered by the explosion-protection
regulations.
•
To avoid the hazard of explosion when spraying, provide for effective natural or
artificial ventilation.
•
There must be no sources of ignition such as, for example, open fires, smoke of lit
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the
vicinity during spraying.
•
Ensure that no solvent vapors are sucked in by the unit. Do not spray onto the unit!
•
The spray gun is not a toy; children must therefore not be allowed to handle it or play
with it.
•
Before working on the spray gun remove the power plug from the socket.
•
Cover areas that are not to be sprayed. When working keep in mind that wind, for
example, may transport paint mist over great distances and cause damage.
•
Do not lay the spray gun.
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fulfilled.

4. Description/ Scope of delivery

1 Air cap
2 Nozzle
3 Union nut
4 Spray gun
5 Trigger
6 Material volume regulation
7 Air hose
8 ON/OFF switch
* This is inside the container: remove it before starting operations!

5. Coating Materials Suitable for Use

Chalk paints and other decorative paints
Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes,
staining sealers and wood sealer-preservatives.
18
Description/ Scope of delivery (Fig. 1)
Studio Home Decor Sprayer
9 Air filter
10 Mains lead
11 Spray gun holder
12 Container
13 Stir stick
14 Cleaning brush
15 Replacement nozzle seal*