W 590 Flexio
4. Description/ Scope of delivery
1) Air cap
3) Spray jet adjustment ring
5) Wall Extra I-Spray spray attachment
7) Air volume control
9) Air ilter cover (right + left)
11) Mains lead
13) Valve
15) Stirring rod
17) Practice poster
19) Standard spray attachment
21) Lubricating grease*
* This is inside the container: remove it before starting operations!
5. Field of application
Many diferent coating substances can be processed with the W 590.
A diferent spray attachment must be used, depending on the coating substance:
Coating Materials
Low-viscosity coating substances:
Water- and solvent-based paints, inishes,
primers, 2-component paints, clear
inishes, automotive inishes, staining
sealers and wood sealer-preservatives.
All coating materials with the red Perfect
Spray logo
Interior wall paint (dispersions and latex
paint)
All coating materials with the green
Perfect Spray logo
6. Coating Materials Suitable for Use
Interior wall paint (dispersions and latex paint)
Water- and solvent-based paints, inishes, primers, 2-component paints, clear inishes,
automotive inishes, staining sealers and wood sealer-preservatives.
Description/ Scope of delivery (Fig. 1)
2) Nozzle
4) Union nut
6) Trigger
8) Spray gun rear part
10) Material volume adjustment
12) Container
14) Ventilating hose
16) Feed hopper (2 pcs.)
18) Replacement air ilter (2 pcs.)
20) Replacement nozzle seal (Standard
spray attachment)*
Spray attachment
Standard
Wall Extra I-Spray
GB
25