Description/ Scope Of Delivery; Coating Materials Suitable For Use - WAGNER W690 Mode D'emploi

Outdoor Paint Sprayer Wood Protection
•
Do not spray any liquid of unknown hazard potential.
•
The device may not be used in workplaces covered by the explosion-protection
regulations.
•
To avoid the hazard of explosion when spraying, provide for effective natural or
artificial ventilation.
•
There must be no sources of ignition such as, for example, open fires, smoke of lit
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the
vicinity during spraying.
•
Ensure that no solvent vapors are sucked in by the unit. Do not spray onto the unit!
•
The spray gun is not a toy; children must therefore not be allowed to handle it or play
with it.
•
Before working on the spray gun remove the power plug from the socket.
•
Cover areas that are not to be sprayed. When working keep in mind that wind, for
example, may transport paint mist over great distances and cause damage.
•
The units may only be used with a functional valve. If paints rises in the ventilating
hose (Fig. 12 A, item 14) do not operate the unit further! Dismantle and clean the
ventilating hose, valve and diaphragm and replace the diaphragm if necessary.
•
Do not lay the spray gun.
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fulfilled.

4. Description/ Scope of delivery

1 Air cap
2 Nozzle
3 Union nut
4 Standard spray attachment
5 Trigger guard
6 Material volume regulation
7 Handle
8 ON/OFF switch
9 Air hose
10 Carrying belt
* This is inside the container: remove it before starting operations!

5. Coating Materials Suitable for Use

Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes,
automotive finishes, staining sealers and wood sealer-preservatives.
All coating materials with the red Perfect Spray logo.
Description/ Scope of delivery (Fig. 1)
11 Air filter
12 Mains lead
13 Spray gun holder
14 Container
15 Ventilating hose
16 Valve
17 Stir stick
18 Replacement nozzle seal*
19 Lubricating grease*
GB
19