Technical Data - Lenz Digital Plus LS100 Mode D'emploi

Important advice, please read first!
This manual
should be read carefully before connecting and using the LS100 for the first
time. It contains background information and helps you avoid possible mistakes.
R -
EAD FIRST
THEN SET THE ADDRESS AND OTHER FEATURES
!
THEN INSTALL
The LS100 is a component of the Digital plus by Lenz
to intensive testing before delivery. Lenz Elektronik GmbH guarantees fault-free
operation if you follow the advice below:
Any use other than that described in this operating manual is not permitted and all
guarantees shall become null and void if the LS100 is used inappropriately.
Only connect the LS100 to devices designed for this purpose. This operating
manual will tell you which devices are suitable.
Observe the technical data contained in this operating manual. Never exceed the
values stated for voltage and power as this could damage the LS100.
Do not expose the LS100 to damp or direct sunlight.
The  terminals of several LS100 units may not be connected to each other as you are
not dealing with continuous mass!

Technical data

Address range
usable for feedback
Supply voltage
(battery, laboratory power supply)
Max. voltage at input J, K
total 1 – 1024
on point settings
AC or pulsed DC 8 - 18V
pure DC
-
®
system and was submitted
1 – 512
8 - 25V
24 V
21
E