Chevrolet Performance LT5 Instructions De Montage page 2

Kit Content:
DESCRIPTION
LT5 ENGINE (DRY OIL SUMP)
CAP-OIL FILL
INSTRUCTION SHEETS
PUMP-COOLANT
Oil fill cap
Install the oil fill cap by twisting clockwise while pushing inward.
Intercooler coolant pump
The LT5 kit is supplied with a supercharger intercooler pump. A custom liquid to air intercooler must be incorporated within the
vehicle to reduce the charge air temperature. If purchasing the Chevrolet Performance Parts (CPP) engine controller, it will have an
electrical connector designed to fit the supplied pump. The CPP controller will run the pump when cooling is required.
Pump Outlet
Pump Inlet
Intercooler pluming
Left side cooler outlet
Left side cooler inlet
LT5 Dry Sump Engine Installation
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
QTY
1
1
1
1
Oil fill cap
19417106
IR 03OC18
PART NO.
DATE
03OC18 Initial Release - Rocko Parker
2
SHEET
REVISION
36
OF
AUTH
N/A