Chevrolet Performance LT4 Instructions De Montage

Thank you for choosing Chevrolet Performance Parts as your high performance source. Chevrolet Performance Parts is
committed to providing proven, innovative performance technology that is truly.... more than just power. Chevrolet Performance
Parts are engineered, developed and tested to exceed your expectations for fit and function. Please refer to our catalog for the
Chevrolet Performance Parts Authorized Center nearest you or visit our website at www.chevroletperformance.com.
This publication provides general information on components and procedures which may be useful when installing or servicing
your crate engine. Please read this entire publication before starting work.
This crate engine is assembled using brand new, premium quality components. It is based off of the Cadillac 2016 Generation
V LT4 small block engine series architecture, and utilize such modern technologies as individual ignition coil per cylinder and
direct fuel injection.
Due to the wide range of small block applications, if you are retrofitting a previous small block application, you may encounter
installation differences between your crate engine assembly and the previous version. These differences may require
modifications or additional components not included with the engine, including cooling, fuel, electrical, and exhaust systems.
Some fabrication work may be required.
The LT4 crate engine require an engine control system which is available from your Chevrolet Performance Parts dealer.
Check with your dealer or on www.chevroletperformance.com for the control system packages that are currently available.
It is not the intent of these specifications to replace the comprehensive and detailed service practices explained in the service
manuals. For information about warranty coverage, please contact your local Chevrolet Performance Parts dealer.
Observe all safety precautions and warnings in the service manuals when installing a crate engine in any vehicle. Wear eye
protection and appropriate protective clothing. When working under or around the vehicle support it securely with jack stands.
Use only the proper tools. Exercise extreme caution when working with flammable, corrosive, and hazardous liquids and
materials. Some procedures require special equipment and skills. If you do not have the appropriate training, expertise, and
tools to perform any part of this conversion safely, this work should be done by a professional.
This publication is intended to provide information about this crate engine and related components. This manual also describes
procedures and modifications that may be useful during the installation of an LT4 crate engine. It is not intended to replace the
comprehensive service manuals and parts catalogs which cover Chevrolet Performance engines and components. Rather,
it is designed to provide supplemental information in areas of interest to "do-it-yourself" enthusiasts and mechanics. This
publication pertains to engines and vehicles which are used off the public highways except where specifically noted otherwise.
Legal and Emissions Information
Federal law restricts the removal of any part of a federally required emission control system on motor vehicles.
Further, many states have enacted laws which prohibit tampering with or modifying any required emission or
noise control system. Vehicles which are not operated on public highways are generally exempt from most
regulations, as are some special interest and pre-emission vehicles. The reader is strongly urged to check all
applicable local and state laws. Many of the parts described or listed in this manual are merchandised for off-
highway application only, and are tagged with the "Special Parts Notice" reproduced here:
Special Parts Notice
This part has been specifically designed for Off-Highway application only. Since the installation of this part
may either impair your vehicle's emission control performance or be uncertified under current Motor Vehicle
Safety Standards, it should not be installed in a vehicle used on any street or highway. Additionally, any such
application could adversely affect the warranty coverage of such an on-street or highway vehicle.
LT4 Wet Sump Engine
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
LT4 Wet Sump Engine
Specifications Par Number 19332621
IR 02JA18
DATE
17AU15
02JA18
19332622
PART NO.
REVISION
Initial Release - Rocko Parker
Revision - Rocko Parker
1 35
SHEET OF
AUTH
ECA P5E00313
N/A