Indication Area / Display - Kettler ST 7609-68 Mode D'emploi Et Instructions D'entraînement

Training and operating instructions

Indication area / display

On the display, one large-
sized display plus several dis-
play segments in the lower
area of the display appear at
the same time.
After the completion of each
training session, training data
are saved and can be
accessed for the next training
session. Any new data are
added.
Time
24 hours
Training time
(TIME)
Distance
(DISTANCE)
KM
Energy consumption
CALORIES
(KCAL)
Pulse
(PULSE)
The heart symbol flashes
when signal is identified.
14
GB
After the completion of the training ses-
sion, or if the training session is interrupt-
ed, the computer switches to sleep mode
after 4 minutes.
Only time is displayed.
Displayed values
between 0:00 – 99:59
Displayed values
between
0.00 – 99.99
Displayed values
between 0 – 9999
However, the data are only rough values
comparing different exercises. They can-
not be used for medical purposes.
Displayed values
between 40 – 220
As soon as you hold the handle sensors
with both hands, the display indicates
your current heart rate. You may enter a
target value before starting the training.
If the heart rate exceeds this target value,
an acoustic alarm sounds to make you
aware of such.