Sentiotec Pro C3 Instructions D'installation Et D'utilisation page 98

Instructions for use for the user
Example
User Tempera-
program
2
Perform the following steps to save the settings in the table above in user
program 2:
1. Turn the function selector 2 to position A (temperature).
► The temperature symbol lights up.
2. Use the intensity selector 3 to set the temperature to 45 °C.
3. Press the intensity selector 3.
► The intensity selector 3 lights up.
4. Turn the function selector 2 to position B (humidity).
► The humidity symbol lights up.
5. Use the intensity selector 3 to set the humidity to 55%.
6. Press the intensity selector 3.
► The intensity selector 3 lights up.
7. Turn the function selector 2 to position D (light).
► The light symbol lights up.
8. Use the intensity selector 3 to set the humidity to 50%.
9. Press the intensity selector 3.
► The intensity selector 3 lights up.
10. Turn the function selector 2 to position H (user programs).
► The user symbol lights up.
11. Use the intensity selector 3 to select user program 2.
12. Press the intensity selector 3 for one second.
► The intensity selector flashes.
► The settings are stored in user program 2.
WORLD OF WELLNESS
Humidity
ture °C
45 55
Additional
% output
0
p. 46/52
Light Fan
% %
50 0