Important Information For Your Safety; Intended Use; Safety Information For The Installer - Sentiotec Pro C3 Instructions D'installation Et D'utilisation

Instructions for installation and use
2.

Important information for your safety

The sauna control unit Pro C3 has been produced in accordance
with the applicable safety regulations for technical units. However,
hazards may occur during use. Therefore adhere to the following
safety information and the specific warning notices in the individual
chapters. Also observe the safety information for the devices con-
nected.
2.1.

Intended use

The sauna control unit Pro C3 is used exclusively for operating and
controlling the sauna functions in accordance with the technical data.
The sauna control unit Pro C3 may only be used for operating and
controlling a sauna heater which has been certified as satisfying the
combustion test described in paragraph 19.101 of EN 60335-2-53.
Alternatively, a suitable safety shut-off device can be installed in or
above the heater.
The sauna control unit Pro C3 may only be used for operating and
controlling 3 heating circuits with a maximum heating capacity of
3.5 kW per heating circuit. The maximum evaporator capacity totals
3.5 kW. The maximum additional output capacity totals 3.5 kW.
Any use exceeding this scope is considered improper use. Improper
use can result in damage to the product, in severe injuries or death.
2.2.

Safety information for the installer

● Installation may only be performed by a qualified electrician or
similarly qualified person.
WORLD OF WELLNESS
p. 6/52