Product Description; Scope Of Delivery; Optional Accessories; Product Functions - Sentiotec Pro C3 Instructions D'installation Et D'utilisation

Instructions for installation and use
3.

Product description

3.1.

Scope of delivery

● Sauna control unit
● Heater sensor with integrated excess temperature fuse (F1)
● Sensor wires
● Installation material
● Wire jumper for bridging terminals V1 and Wm for combi heaters without
automatic low-water shut-off
3.2.

Optional accessories

● Bench sensor (item number: O-F2)
● Humidity temperature sensor (item number: O-FTS2)
● Foil sensor (item number: P-ISF-FF)
● Power booster (item number: O-S2-18/O-S2-30)
● Safety shut-off (item number: HT-SWL)
3.3.

Product functions

The sauna control unit Pro C3 features the following functions:
● Regulation of combi heaters with a heating output of up to 10.5 kW and
evaporator output of up to 3.5 kW in the temperature range spanning 30 °C
to 110 °C and a humidity range spanning 5% to 100%.
● A power booster allows the maximum contact rating to be increased from
10.5 kW to 18 kW or 30 kW.
● Optional dimming or activation of a room light (up to 100 W)
● Optional dimmer function or activation of a fan (up to 100 W)
● Remote start function
● Status output
● Preset time function (up to 24 hours)
WORLD OF WELLNESS
p. 9/52
En