Settings (Introduction) - Esoteric P-05 Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MENU
1
Repeatedly press the MENU button to select the menu
item to be changed.
< If you leave the unit idle for 10 seconds, the setting mode will
be cancelled.
2
Use the SKIP buttons (.//) to select the options
within the menu item.
3
Repeatedly press the MENU button until the display
returns normal (or leave the unit idle for 10 seconds) to
exit the setup mode.
Pressing the STOP button also finishes the setup mode.
< Settings are stored even when power is turned off and the
unit is unplugged. In left unplugged for an extended period,
the setting may be lost.

Settings (introduction)

Available menu items and settings
CONV>***
Sets the UP CONVERT sampling frequency of the digital
signal output from the XLR terminals during CD playback.
WORD>***
Turns on or off the word sync function.
LAYER>***
Sets which layer to prioritize for playback when Super
Audio CDs and dual layer hybrid discs are inserted.
XLR>***
Sets the digital signal format output from the XLR
terminals.
i >***
Sets the signal type output from the i.LINK (AUDIO)
terminals.
RCA>***
Turns on or off digital output from the RCA jacks.
DAC>***
Sets the type of D/A converter to be connected.
(Normal display)
Exit the setting mode.
11

Publicité

Chapitres

Table des Matières
loading

Table des Matières