Ec Declaration Of Conformity - SDMO INVERTER PRO 2000 Manuel D'utilisation Et D'entretien

8.5

EC Declaration of conformity

We, SDMO Industries, 12 bis rue de la Villeneuve, CS 92848, 29228 BREST, hereby declare under our sole responsibility that the
following generating sets:
Type
INVERTER PRO 2000
INVERTER PRO 2000 UK
1. Satisfy the provisions
of the following Directives
Machines:
- 2006/42/EC dated 17 May 2006
Electromagnetic compatibility:
- 2004/108/EC (up to 19 April 2016)
- 2014/30/EU (from 20 April 2016)
Directive relating to Noise Emissions of Outdoor Equipment:
- 2000/14/EC dated 8 May 2000
Notified body:
ABOMA B.V.
Galvanistraat, 1 - Postbus
141 -6710 BC EDE -
Netherlands
2. Conform to the safety objectives set out
In the following Directives
Low voltage:
- 2006/95/EC (up to 19 April 2016)
- 2014/35/EU (from 20 April 2016)
Name and address of the person authorised to create and hold the technical file:
L. COURTES, SDMO Industries, 12 bis rue de la Villeneuve, CS 92848, 29228 BREST Cedex 2, France.
Item reference:
3499231000724
3499231000755
Compliance Measured acoustic
procedure: power level:
Appendix VI. 88 dB(A)
L.COURTES
Deputy Studies & Projects Director
7PB-5000101 > 7PB-5039999
7PB-5000101 > 7PB-5039999
through the application of the following harmonised
standard(s):
- EN 12601: 2010
- EN 60034-1: 2010 (COR 2010)
- EN 61000-6-1: 2007
- EN 61000-6-2: 2005 (COR 2005)
- EN 61000-6-3: 2007 (AMD1 2011, AMD1/COR 12)
- EN 55011: 2009 (AMD 1 2010)
Guaranteed sound
power level (LwA):
89 dB(A)
through the application of the following harmonised
standard(s):
- EN 60204-1: 2006 (AMD 1 2006, COR 2010)
Serial numbers:
Rated output:
1600 W
Drawn up in Brest on 01/01/2016