Repairing Minor Faults - SDMO INVERTER PRO 2000 Manuel D'utilisation Et D'entretien

7 Repairing minor faults

The generating set...
Does not start or stops
Does not function normally
(noise, smoke, etc.)
Does not supply
electrical current
*France: 0 825 801 100 (calls charged at €0.15 per min inc. tax).
Check that:
The checks before starting have been
performed
YES
The fuel level is correct.
YES
The fuel tap button is
ON.
YES
The atmospheric pressure setting
button of the fuel tank is ON.
YES
The oil level is correct.
The oil safety light is off.
YES
The engine switch is positioned at
YES
The devices to be used have not been
connected prior to starting.
YES
Maintenance has been correctly
performed on the generating set
components.
YES
Have the generating set checked by
one of our agents*.
The circuit breaker for the 12V socket
is triggered.
YES
The capacity of the generating set has
not been exceeded.
The overload warning light is off.
YES
The connected devices and their power
cords are not faulty.
YES
Have the generating set checked by
one of our agents*.
Perform the checks.
NO
Fill up with fuel.
NO
Turn the fuel tap button ON.
NO
Turn the atmospheric pressure setting
NO button of the fuel tank ON.
Top up with oil.
NO
. Position the engine switch at
NO
Disconnect the devices then try to restart
NO the generating set.
Perform maintenance on the generating
set in accordance with the
NO
recommendations
Press the circuit breaker
NO for the 12V socket.
Reduce the load.
NO
Try with another device and another power
NO cord.
Solutions: