Technical Data - Leister GEOSTAR G5 Instructions D'utilisation

Conformity
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kägiswil, Switzerland confirms that in the model made
available for purchase, this product fulfills the requirements of the following EU directives.
Guidelines:
Harmonized standards:
Kägiswil, 12/6/2017
Disposal
Electrical equipment, accessories and packaging should be subjected to environmentally friendly
recycling. For EU countries only: Do not dispose of electrical equipment with household refuse!

Technical data

Device model
* Voltage
Power
Frequency
Temperature, stepless
Drive slow, stepless
Drive fast, stepless
Welding pressure max.
Emission level
Dimensions (L × W × H)
Weight (without power cord) kg/lbs
Mark of conformity
Protection class I
Device
Welding wedge length
Width of welding wedge
Weld seam width
We reserve the right to make technical changes. Additional versions upon request
*Connection voltage cannot be switched
2006/42, 2014/30, 2014/35, 2011/65
EN 12100, EN 55014-1, EN 55014-2, EN 61000-6-2, EN 61000-3-2,
EN 61000-3-3, EN 62233, EN 60335-1, EN 60335-2-45, EN 50581
Bruno von Wyl, CTO
GEOSTAR G5
V~
W
Hz
°C 80 – 460
°F 176 – 788
m/min
ft./min 2.6 – 19.6
m/min 1.5 – 12
ft./min 4.9 – 39.3
N/lbs 1500 / 337
L (dB)
pA
mm 482 × 278 × 269
16.4 / 36.2
mm
mm
mm
Christoph Baumgartner, GM
GEOSTAR G5
120 200 / 220 – 240
1800
50 / 60 50 / 60
80 – 460
176 – 788
0.8 – 6 0.8 – 6
2.6 – 19.6
1.5 – 12
4.9 – 39.3
1500 / 337
60
482 × 278 × 269
16.4 / 36.2
G5
90
50
2 × 11 2 × 15
GEOSTAR G7
220 – 240
2800
50 / 60
80 – 460
176 – 788
0.8 – 7
2.6 – 22.9
1.5 – 12
4.9 – 39.3
1500 / 337
60
482 × 278 × 269
17.7 / 39
2 × 15
2800
60
G7
130
50
35