Leister GEOSTAR G5 Instructions D'utilisation page 53

Deleting the day's distance
• In the function display (33), rotate the «e-Drive»
• Press the «e-Drive»
• Select "Show Duty Info" in the "Setup" menu by rotating the «e-Drive»
• Rotate the «e-Drive»
• The hour counter symbol
• The day's distance is deleted.
• In the function display (33), rotate the «e-Drive»
Key lock
The key lock is activated or deactivated by simultaneously pressing "Up" and "Down" keys (27/28) for at least
2 seconds.
Profile selection
• The GEOSTAR has ten freely defi nable profi les.
• Selecting the symbol
be selected with the "Up" and "Down" (27/28) keys and confi rmed by pressing the «e-Drive»
• If, during operation, you change setpoints in profi les you have created, the setpoints will not be saved in the profi le.
• Every time the machine is switched on/off , the values defi ned in the profi le will reappear.
• The currently selected profi le can be seen on the left in the status display "Section 1" (35).
• If you would like to use the last set values when you switch on the machine again, you must select the BASIC profi le.
• If the "BASIC" profi le is selected, then the "BASIC" profi le will not appear in the status display "Section 1" (35),
but instead the voltage that is present on the device.
Profile name
35
briefl y.
to select "Day Distance" and press the «e-Drive»
is highlighted. Press the «e-Drive»
in the function display (33) takes you to the "Select Profi le" menu. The profi les can
35
to select the Settings
and pressing it briefl y
to confi rm.
to select the symbol "Return to working display"
Voltage display
menu.
.
briefl y.
.
.
53