Intended Use; Improper Use; Technical Data; Transport - Leister AIRSTREAM ST Notice D'utilisation

1.1 Intended Use

The AIRSTREAM ST blower is designed for professional applications to supply
air to air-powered LEISTER tools such as Diode S/PID, Welding Pen S/R and
Labor S (with terminal box).
Use only original Leister spare parts and accessories because otherwise no
warranty or guarantee claims can be asserted.

1.2 Improper Use

Any other use or any use beyond that described is deemed as improper use.

2. Technical data

Nominal voltage
Nominal voltage
Frequency
Air volume
Emission level
Dimensions (L × W × H)
Weight
Static pressure
Mark of conformity
Protection class I
Subject to change without prior notice.

3. Transport

Comply with applicable national statutes regarding the carrying or lifting of loads.
The weight of your AIRSTREAM ST without transport box is 24 kg.
Two persons are required for transportation with the transport box.
Use only the attached carrying handle (2) for transporting the blower.
V~
W
Hz
l/min
L (dB)
pA
mm 600 (without power cord) × 250 × 362 (H with handle)
kg
kPa
Never store flammable
(e.g. plastic, wood or paper) on the blower!
Never use the carrying handle (2) on the
device for transporting with a crane!
To lift the blower by hand, use the carrying
handle (2).
AIRSTREAM ST
230 V
230
215
50
200 (total)
< 48
24
25
materials
2
11