Technical Data - Leister WELDPLAST S1 Notice D'utilisation

Conformity
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland confirms that this product
in the version put into circulation by us, fulfils the requirements of the following EC directives.
Directives:
Harmonised standards:
Kaegiswil, 13.07.2017
Disposal
Electrical equipment, accessories and packaging should be recycled in an environmentally
friendly way. For EU countries only: Do not dispose of electrical equipment with household
refuse!

Technical Data

Voltage
Power consumption
Frequency
Air temperature
Plasticizing temperature °C
Output (Ø 3 mm)
Output (Ø 4 mm)
Filler rod
Emission level
Dimensions L × w × h mm
Weight
Conformity mark
Protection class I
The right to make technical changes is reserved
22
2006/42,
2014/30,
2014/35,
2011/65
EN 12100, EN 55014-1, EN 55014-2, EN 61000-6-2, EN 61000-3-2,
EN 61000-3-3, EN 62233, EN 60335-1, EN 60335-2-45, EN 50581
Bruno von Wyl, CTO
V~
W
Hz
°C
kg/h
kg/h
mm
L (dB)
pA
kg
Christoph Baumgartner, GM
100 120
1500 1800
50/60 50/60
max. 360
max. 260
HD-PE 0.2 – 0.5; PP 0.2 – 0.5
HD-PE 0.3 – 0.8; PP 0.3 – 0.75
Ø 3 / Ø 4
76 (K = 3 dB)
435 × 264 × 91 (without welding shoe)
4.7 (without power supply cord)
230
1600
50/60