Technical Data - Leister TRIAC DRIVE Instructions D'utilisation

Conformity
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland
confirms that this product, in the version as brought into circulation through us, fulfils
the requirements of the following EC directives.
Directives:
Harmonised standards:
Kaegiswil, 10.04.2013
Disposal
Power tools, accessories and packaging should be sorted for environmental-
friendly recycling. Only for EC countries: Do not dispose of power tools into
household waste! According to the European Directive 2002/96 on waste
electrical and electronic equipment and its incorporation into national law,
power tools that are no longer suitable for use must be separately collected
and sent for recovery in an environmental-friendly manner.

Technical data

Type
Voltage
Power consumption W
Frequency
Drive speed
Dimensions
Weight
Mark of conformity
Approval mark
Certification scheme
Protection class I
Mains voltage cannot be switched over !
For hot air blower technical data, refer to the TRIAC AT or TRIAC ST operating
instructions !
Technical data and specifications are subject to change without prior notice
12
2006/42, 2004/108, 2011/65
EN 12100-1, EN 12100-2, EN 14121-1
EN 55014-1, EN 55014-2, EN 62233
EN 6100-3-2, EN 6100-3-3, EN 60335-2-45, EN 50581
Bruno von Wyl, CTO
V~ 230
100
Hz
m/min.
250 × 165 × 88, handle ø 63
mm
kg 2.3 with 3 m power supply cord
Beat Mettler, COO
DRIVE
120
100
50 / 60
0.5 – 3 stepless
2
3
CCA
1