Connecting The Handpiece; Connecting The Foot Control; Connecting The Ac Power Cord; Installing The Irrigation Tube - NSK Surgic Pro Mode D'emploi

4-2 Connecting the Handpiece

CAUTION
micromotor is under load.
Push the handpiece on to the motor taking care to keep it in
alignment.

4-3 Connecting the Foot Control

then insert the plug into the Foot Control Cord connector
socket on the Control Unit. Secure the plug by fastening
the Lock Nut. Refer Fig.3.

4-4 Connecting the AC Power Cord

4-5 Installing the Irrigation Tube

Pump Cover Lever
AC Power Cord
Pump Cover
Tube Guide
Fixed Position
8
Screw
Foot Control Cord Plug
Fixed Position
Water flow direction
Stopper
Fig.2
Fig.3
Fig.4