Preparing The Connection To The Flue - Dovre Sense 203GAO Installation Et Mode D'emploi

1
2
3
If you detect transport damage or any other
damage or defects, do not use the appliance
and notify the supplier.
Remove the detachable parts from the appliance
before you begin its installation.
It is easier to move the appliance and to avoid
damage if the removable parts have been
removed.
Note the location of the removable parts, so
that you can re-position the parts in the correct
place later on.
The door of the appliance can be opened by
unscrewing the blocking screw in the handle
and then pressing the handle.
Subject to change because of technical improvements
10
Placing the stove
Preferably place the stove on a flat floor. The appli-
ance is fitted with adjustable feet in the floor plate
so that the appliance can be adjusted and made per-
fectly level.
Take the distance from combustible material into
account. See the appendix "Distance from com-
09-20021-361
bustible material".
Preparing the connection to
the flue
When connecting the stove to the flue, you can
choose to connect to the top or to the back of the
stove.
Connecting to the top
The stove is ready to be connected at the top upon
delivery.
Connecting to the back
1. First remove the baffle plate; see the following fig-
ure.
09-20021-365
7