Floor And Walls; Product Description; Installation; General Preparation - Dovre Sense 203GAO Installation Et Mode D'emploi

Additional insulation is particularly important when
the flue pipe is running through unheated spaces or
exterior walls. Metal chimneys, or chimney sec-
tions outside the home must always consist of
double-walled insulated tubes. The part of the chim-
ney above the roof must always be insulated.
The chimney should be sufficiently high (at least
2.5 metres) and protrude in a zone that is not dis-
rupted by surrounding buildings, adjacent trees or
other obstacles.

Floor and walls

The floor on which the appliance is placed must have
sufficient bearing capacity. The weight of the appli-
ance is given in the appendix "Technical Data
appendix".
Keep sufficient distance between the appli-
ance and combustible materials such as
wooden walls and furniture.
Carpets and rugs must be at least 80 cm away
from the fire.
For further requirements with respect to fire
safety, see the appendix "Distance from com-
bustible material".

Product description

1
2
3
5
4
1. Glass pane
2. Ceramic wood block set, coals or stones
6
9
7
8
6
5
09-20021-415
3. Burner
4. Door opening
5. Opening to gas valve
6. Gas connection G3/8"
7. Gas block
8. Receiver
9. Cast-iron collar
Features of the appliance
The SENSE GAO is a free-standing gas stove.
The appliance extracts the combustion air from the
room in which it is located.
Delivery of the stove includes a battery-operated
wireless remote control with thermostat.
The appliance comes with electronic ignition.
The appliance is delivered with a natural looking
wood block set, a set of coals or a set of white
stones made of ceramic material.

Installation

General preparation

Please check the appliance immediately after deliv-
ery for damage during transport or any other dam-
age or defects. The appliance is attached to the
pallet with screws at the bottom.
Subject to change because of technical improvements