GB
Before first use, remove the protective film and any residuals of glue from the
surfaces using a suitable solvent.
The oven can be installed on a fixed bench (with feet) or on a special support stand supplied by the
Manufacturer as an accessory.
In any case:
•the oven must be perfectly stable;
•the oven is not suitable for recess mounting or for installation in sets;
During bench installation, level the oven by operating on the adjustable feet (
Fig. 2
2.2 Electrical connection
Connection to the power mains
Connection to the power mains must be made according to the current international, national and local
regulations.
Before the connection, make sure that the electrical data on the rating plate located at the bottom of the
rear side panel agree with the power supply (
A voltage variation of ±10% is allowed
Fig.
3
).
.
32
Fig.
2
).
Fig. 3