Handling, Transportation And Unloading - Euromax 9523PBH Instructions Pour L'installation, L'utilisation Et La Maintenance

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

GB

1.4 Handling, transportation and unloading

The packaging of the appliance is produced by the company according to the agreements signed case by
case, to on the country the appliance is being sent to, or to the means of transport used.
Once the appliance is installed, packaging can be reused or disposed according to the regulations in force
in each country.
Ovens must be carried with their original packaging as close as possible to the installation site.
Only specialized personnel can lift or handle the oven or any accessories carried independently.
Material sent is checked thoroughly before being handed over to the forwarding agent.
Make sure that the appliance has not been damaged during the delivery and that the packaging has not
been damaged and some contents removed.
In case of damaged products, or missing components, immediately contact the carrier and the
manufacturer providing photographic evidence.
Please check the supplied material matches order specifications. Don't drag or
incline the oven for any reason.
The oven is to be lifted up perpendicularly to the floor, moved in a horizontal
direction and then laid down perpendicularly to the floor.
WARNING!
It is recommended not to install the oven on a slippery floor.
1.5 Conformity in compliance with directives/Standards
Ovens comply with the provisions
Directives and their specific associated standards:
•directive
2006/42/CE
•low voltage safety directives
EN60335-2-42
);
•directive
2004/108/CE
EN50165 EN55014, EN55014-1, EN50366 EN61000
,
According to the previous directives, the Manufacturer declares
European legislation in force and, consequently, feature regulation CE marking enabling them to be sold
in European countries.
The functional components of the oven have a noise emission level of less than
and safety requirements indicated in the following
on machinery and subsequent updates;
2006/95/CE
on electromagnetic compatibility and subsequent updates (Standard
and subsequent updates (Standard
e
series).
that its products comply with the
30
European
EN60335-1
70 dB(A).
,

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

9806pbh9810pbh

Table des Matières