Transportation And Storage; Inspect The Delivery; Transportation Guidelines; Storage Guidelines - Xylem LOWARA 1VM02P Manuel D'installation, D'utilisation Et D'entretien

en - Original instructions
60335-2-41:2003+A1:2004+A2:2010, EN
62233:2008
• EN 60034-30:2009, EN 60034-30-1:2014
Montecchio Maggiore, 08.04.2016
Amedeo Valente
(Director of Engineering and
R&D)
rev.01
1.6.2 EU Declaration of Conformity (No
EMCD09)
1. Apparatus model/Product:
see label on first page
2. Name and address of the manufacturer:
Xylem Service Italia S.r.l.
Via Vittorio Lombardi 14
36075 Montecchio Maggiore VI
Italy
3. This declaration of conformity is issued under
the sole responsibility of the manufacturer.
4. Object of the declaration:
electric pump
5. The object of the declaration described above is
in conformity with the relevant Union harmoni-
sation legislation:
Directive 2014/30/EU of 26 February 2014
(electromagnetic compatibility)
6. References to the relevant harmonised stand-
ards used or references to the other technical
specifications, in relation to which conformity is
declared:
7. Notified body: -
8. Additional information: -
Signed for and on behalf of:
Xylem Service Italia S.r.l.
Montecchio Maggiore, 08.04.2016
Amedeo Valente
(Director of Engineering and
R&D)
rev.00
Lowara is a trademark of Xylem Inc. or one of its
subsidiaries.

2 Transportation and Storage

2.1 Inspect the delivery

1. Check the outside of the package.
2. Notify our distributor within eight days of the de-
livery date, if the product bears visible signs of
damage.
3. Remove the staples and open the carton.
4. Remove the securing screws or the straps from
the wooden base (if any).
5. Remove packing materials from the product.
Dispose of all packing materials in accordance
with local regulations.
10
6. Inspect the product to determine if any parts
have been damaged or are missing.
7. Contact the seller if anything is out of order.

2.2 Transportation guidelines

Precautions
WARNING:
• Observe accident prevention regula-
tions in force.
• Crush hazard. The unit and the com-
ponents can be heavy. Use proper
lifting methods and wear steel-toed
shoes at all times.
Check the gross weight that is indicated on the
package in order to select proper lifting equipment.
Position and fastening
The unit can be transported either horizontally or
vertically. Make sure that the unit is securely fas-
tened during transportation, and cannot roll or fall
over.
For more information about how to securely harness
the unit, see Figure 2 on page 186.

2.3 Storage guidelines

Storage location
NOTICE:
• Protect the product against humidity, dirt, heat
sources, and mechanical damage.
• The product must be stored at an ambient tem-
perature from -40°C to +60°C (-40°F to 140°F).

3 Product Description

3.1 Pump design

The pump is a multistage, non-self priming pump.
The pump can be used to pump:
• Cold water
• Warm water
Intended use
The pump is suitable for:
• Civil and industrial water distribution systems
• Irrigation (for example, agriculture and sporting
facilities)
Improper use
DANGER:
Do not use this pump to handle flamma-
ble and/or explosive liquids.
WARNING:
Improper use of the pump may create
dangerous conditions and cause person-
al injury and damage to property.
NOTICE:
Do not use this pump to handle liquids containing
abrasive, solid or fibrous substances, toxic or corro-
sive liquids, potable liquids other than water or liq-